- Butyle Rubber Sheet
- Filament Reinforced Self Adhesive Tape
- Cerback / Ceramic Backing strip
- ECCS Tapes
- Wing Seal
- Self Amalgamating EPDM High Voltage Tapes
- Self Adhesive Aluminium Foil Tape
- Siback / Fiber Glass Tape
- Adhesive Butyl Rubber Tape
- Binder Tapes
- Self Adhesive Foam Tape
- Vapour Stop Laminate Foil
- Water Blocking Tapes & Flat Yarn
- Solfilm / Water soluble film
- Waterblocking Tapes
- Woven Tapes
- Stainless Steel 304 band
- Swabsorb / Wipes
- Air Filter Fabric
Woven Tape
Characteristics:
Black Colour, RoHS Comliant, REACH Compliant
Typical Applications:
Separating, Wire Armouring, Multi Core Cable , Conductor Segments Benefits:
Proven Long Term Stability, Prevents Extruded Compound Penetration, Excellent Flexibility and Bi-directional Tensile Strength
Typical Properties (T= 23°C - RH = 50 %)
| Unit | Test Method | ||
| Mass per Unit Area | 65 | g/m2 | ISO-9073- 1 |
| Thickness | 0.20 | mm | ISO-9073-2 |
| Tensile Strength | 75 | N/cm | ISO-9073-3 |
| Elongation | 25 | % | ISO-9073-3 |
| Maximum Processing Temperature | 230 | °C | GTEST12* |
| Maximum Service Temperature | 145 | °C | IEC-216 |
Storage & Handling Recommendations:
Optimum storage conditions: T = 18 - 28°C, RH <50%). Protect material from dust, humidity, heat, liquids. Store material in original, sealed packaging when not used.
Actual Image:
 |
Two Side plastic coated stainless steel - 304 tape
TS6 plastic coated stainless steel tape consists of annealed and soft stainless steel foil coated on both sides with the copolymer of LDPE. The copolymer exhibits excellent adhesion to the metal substrate as well as low, linear low, medium, high density polyethylene as well as chlorinated polyethylene. The stainless steel foil is annealed that gives it an excellent formability and fabrication characteristics.
The coating on TS6 plastic coated metal adheres well to polyethylene and to jackets that contain, CPE, HDPE, LLDPE, LDPE or MDPE. This bonded jacket construction:
Product Description:
Characteristics:
- 1. Forms a unified sheath for the cable incorporating the strength of the steel component with the elongation of the jacketing component.
2. Provides increased resistance to the damage during installation at high and low temperatures
3. Reduces the possibility of kinking.
4. Prevents jacket shrink-back and fatigue failure at the splice case.
Actual Image:
 |
Construction:
Copolymer/Stainless Steel/Copolymer
Thickness:
Metal: 0.130 mm + 10%; Copolymer: 55 + 5 Microns
Length per coil:
1,600 meters
Metal:
AISI-304 alloy stainless steel
Meets or exceeds IRS TC-55
| Property | Test method | Typical Values |
| UTS | ASTM A-240 | 55 Kg/mm2 |
| % Elongation | ASTM A-240 | > 40% |
| Bond Strength: | ||
| Coating to Metal | ASTM B 736 | 615 N/mm |
| Coating to coating: | ASTM B 736 | Breaks tape
1750 N/mm |
a. Lap Shear b. Heat Seal |
||
| Coating to PE jacket: | ||
a. Longitudinal |
REA PE-90 | 10.0 |
b. Circumferential |
ASTM D4565 | 37.0 |
| Chemical Composition: | ASTM A-240 | 304 alloy |
Swabsorb / Wipes
SWABSORB For STREAK FREE Ultra Cleaning, Day After Day.
Swabsorb microfilament cleansing wipes pickup dirt particles that conventional clothes leave behind!
MICROFILMENT FIBRES: Swabsorb is made of Polyamide and Polyester microfilament continuous fibers and not of Microfiber yarn. Dtex of SwabSorb is 0.15 dtex against 0.0-1 dtex of microfiber yarns. Micro fiber is made up of many small staple fibers, each of about 50-100mm long, whereas SwabSorb is a continuous filament of very fine denier. 1 M² of SwabSorb has about 10,000 km of filament. SwabSorb is an ideal material for high-tech wiping, cleaning and drying applications. It is an ideal material for wiping, cleaning and drying:
- Cleaning cloths and dusters
- Automotive wipes
- Industrial Wipes
- Surface preparation wipes
- Laundered Towels
- Tea Towels
Key Benefits
- Cleansing Power & Absorption
- No Fiber Release -Non Linting
- For Sensitive Surfaces
- Strong & Non -Directional
- Environmental Friendly
- Safe For Food Contact
- Washable
Application Areas
SwabSorb cleansing wipes can be used for cleaning of wide variety of surfaces such as Glass, Mirrors, Counter Tops, Toilet Seats, Floors, Walls, Computer & TV Screens, Telephones, Stainless Steel, Aluminium, Wood, Leather, Marble, Plastic etc. The list is practically endless.Actual Image
 |
 |
How to Use ?
- Dampen SwabSorb in cold water, wipe surface clean, rinse and repeat. When finished usin, hang dry and place SwabSorb back in the reusable pack. Machine Washable using mild detergent. Do not wash with Towels or Articles that produce Lint.
- FOR DISINFECTION: Spray the appropriate disinfectant onto the surface. Allow product to dwell according to label directions, and wipe surface dry with SwabSorb.
- FOR GENERAL CLEANSING: Lightly spray the recommended product on to SwabSorb and wipe the surface clean. For stubborn soil, spray additional product onto the surface and wipe dry.
Typical Characteristics of 100 gsm SwabSorb
| Parameter Values | Unit | |
| Weight per M2 | gsm | 100 |
| Thickness | MM (Avg) | 0.48 |
| Tensile Strength MD | N/50 MM (Avg) | 250 |
| Tensile StrengthcD | N/50 MM (Avg) | 250 |
| Elongation MD | % (Avg) | 40 |
| Elongation CD | % (Avg) | 45 |
| Tear Resistance MD | N (Avg) | 7.5 |
| Tear Resistance CD | N (Avg) | 7.5 |
Micro Structure
As you can see thee have isotropic strength and are very strong. Further, these are bicomponent split microfilament yarns as shown below. One segment is polyester while the other is polyamide and each microfilament has very fine denier of 0.15 dtex. Regular cleansing fabrics have a fiber dia of about 0.3 mm or 300 microns, whereas split microfilaments have a wedge shape structure of size less than 1 micron! This gives a huge surface area to the fabric, and a very big absorption capacity of micro dust particles.
Copyright © Swabs Tapes India Pvt. Ltd. All Rights Reserved.Site Developed & Promoted by Advent InfoSoft Pvt Ltd.