TS 1
- Ethylene Propylene Diene Rubber (EPDM) Based Insulating Tape
- Self - amalgamating.
- Can be used on all extruded dielectric power cables through 33 kV, underground or overhead, indoor or outdoor.
Directions for Use :
- Prepare cable in usual manner.
- Remove separator from tape and apply half-lapped, stretching tape 100% as is being applied. A 100% stretch is obtained when the tape is stretched enough to reduce its width to approximately two-thirds of the original width
Primary insulation and jacketing can be done using ts-1 tape very easily in making straight through joints and bifurcated joints. The void-free insulation yields moisture proof jacketing. Ts- 1 tape can be used to terminate cables and is recommended in building stress cones. During nesting season and otherwise, power interruptions occur due to bird faults which can be eliminated by using ts-1.
Actual Image of EPDM Tape:
Self Adhesive Aluminium Foil Tape
Raw Materials : Aluminium Foil sheet, Adhesive, Release Paper etc.
| Description |
Self Adhesive Tape |
| Item Name |
Aluminium Tape |
| Backing |
Aluminium |
| Adhesive |
Acrylic Emulsion Based / Solvent Based |
| Thickness |
25mic -75mic |
- Superior conformability in vapor sealing of fiberglass duct board, sheet metal ducts & FSK systems.
- High tack cold weather acrylic adhesive combines extremely high quick stick at normal temperatures with superior performance at low temperatures and high humidity.
- Recommended for use at normal and high temperatures also.
S.A.Foil Tape Application
Primarily used for vapor sealing fiberglass duct board and sheet metal ducts, can also be used on FSK system.
Actual Image:
Use :
To make filters that purify air up to 99.9%. Air Filter Fabric used in pharmaceutical Industries, Food processing Industries & various other Industries.
Color : White
Availability : 1-2 Weeks
Actual Image: